DRAG CONVERSION FOR THE REVOLUTION Z

1. Remove the spool from the reel frame

2. Locate the small hex screw on the side of the drag chamber

3. With a hex key, loosen the screw (you do not need to remove all the way)

4. With your finger unscrew the top of the drag chamber grabbing where the knurled cap is located

5. Remove cap

6. Locate the one way clutch found on the drag cap spindle

7. Flip the one way clutch and reassemble

DRAG CONVERSION FOR THE SERIES-1

1. Remove the spool from the reel frame

2. Carefully remove the flat head screw cap from the top of the drag cover

3. Carefully remove drag cover and flip over to expose one way bearing (be careful not to lose small parts)

4. Remove one way clutch (looks like a bearing with rolling pins on the inside)

5. Flip one-way clutch

6. Reassemble reel

DRAG CONVERSION ENIGMA 2.0

1. Remove the spool from the frame

2. Remove the small clip from inside the spool

3. Carefully remove and flip the one way clutch (looks like a bearing with rolling pins on the inside) 

4. Reassemble reel

DRAG CONVERSION REVOLT

1. Remove the spool from the frame

2. With a small size flat-head screwdriver loosen the small silver set screw located inside the reel body.

3. Grab the entire black drag cap (the part where the small set screw is located) and turn counterclockwise to unscrew the entire cap from the frame

4. Inside the drag cap is a one-way clutch bearing. Remove and flip the clutch 180

5. Reassemble reel